FLL8402 Mobile Tool Cabinet

(1) Total of drawers: 5drawers,  H100EA * 3+H150EA * 2;

(2) The drawers can be freely divided. The standard configuration divides them into 2*2, that is, one vertical divider and two horizontal partitions, dividing the drawer into 4 compartments;

(3) 4-inch casters (diameter 100mm), polyurethane material, 2 fixed wheels at the back, 2 swivel wheels at the front, with brakes;

(4) Top-mounted 30mm high detachable storage box, lined with 3mm oil-resistant and anti-slip rubber pads;

(5) Storage box reserved installation holes, can be installed with tool hangers as needed;

(6) Made of high-quality cold-rolled steel plate, after degreasing, rust removal, phosphating treatment, surface electrostatic powder coating treatment;

(7) Handle is a standard full-width aluminum alloy handle. The right side contains a safety lock. When opening the drawer, you need to first turn the safety lock to the left. This can prevent the drawer from accidentally sliding out during pulling and pushing;

(8) Standard color: drawer panel is RAL5012 blue, others are RAL7035 off-white. If no special instructions are given during ordering, the standard color will be provided;

FLL8402 model: Width 564mm, depth 572mm, height 840mm, other configurations are the same;

MLL8402 model: Width 717mm, depth 572mm, height 840mm, other configurations are the same;

Note: The classification boxes inside the drawers are optional accessories and need to be purchased separately.