FLM8903 Mobile Tool Cabinet

(1) Total of drawers: 2drawers, H100EA * 2;

(2) The drawers can be freely divided. The standard configuration divides them into 2*2, that is, one vertical divider and two horizontal partitions, dividing the drawer into 4 compartments;

(3) The bottom has one single door with a lock;

(4) 4-inch heavy-duty casters (diameter 100mm), polyurethane material, 2 fixed wheels at the back, 2 swivel wheels at the front, with brakes;

(5) The top is equipped with a 30mm high detachable storage box, lined with 3mm oil-resistant and anti-slip rubber pads;

(6) The storage box has reserved installation holes, allowing for the selection of tool hangers as needed;

(7) Made of high-quality cold-rolled steel plate, after degreasing, rust removal, phosphating treatment, and surface electrostatic powder coating;

(8) The handle is a standard full-width aluminum alloy handle. The right side contains a safety lock. When opening the drawer, you need to first turn the safety lock to the left. This can prevent the drawer from accidentally sliding out during pulling and pushing;

(9) The standard color is: the drawer panel is RAL5012 blue, and the rest is RAL7035 off-white. If there is no special indication during ordering, the standard color will be provided;

FLM8903 model: Width 570mm, depth 572mm, height 880mm, other configurations are the same;

MLM8903 model: Width 723mm, depth 572mm, height 880mm, other configurations are the same;

Note: The classification boxes inside the drawers are optional accessories and need to be purchased separately.