FLM8902 Mobile Tool Cabinet

(1) Total of drawers: 5drawers , H100EA * 3+H150EA * 2;

(2) The drawers can be freely divided internally. The standard configuration divides them into 2*2, that is, one vertical divider and two horizontal divider plates, dividing the drawer into 4 compartments;

(3) 4-inch heavy-duty casters (diameter 100mm), polyurethane material, 2 fixed wheels at the back, 2 swivel wheels at the front, with brakes;

(4) A 30mm high detachable storage box is installed on the top, with 3mm oil-resistant and anti-slip rubber pads inside;

(5) Installation holes are reserved on the storage box, allowing for the selection of tool hangers as needed;

(6) Made of high-quality cold-rolled steel plate, after degreasing, rust removal, and phosphating treatment, the surface is electrostatically painted;

(7) The handle is a standard full-width aluminum alloy handle. The right side contains a safety lock. When opening the drawer, the safety lock needs to be moved to the left first. This can prevent the drawer from accidentally sliding out during pulling;

(8) The standard color is: the drawer panel is RAL5012 blue, and the others are RAL7035 off-white. If no special instructions are provided during ordering, the standard color will be provided;

FLM8902 model: Width 570mm, depth 572mm, height 880mm, other configurations are the same;

MLM8902 model: Width 723mm, depth 572mm, height 880mm, other configurations are the same;

Note: The classification boxes inside the drawers are optional accessories and need to be purchased separately.